You are sure to get professional finishes when using a spray gun, However, there are challenges with it. Tiny mistakes made while using it may lead to uneven coatings, clogs, or a less durable finish. Here are the top five mistakes to avoid for smooth, professional results with your spray gun and accessories like a resin fluid heater.
1. Skipping proper surface preparation
The most common oversight is failure to prepare the surface well. Any grease, dirt, or dust present on the surface provides uneven coatings and weak bonding. For a clean finish, guarantee that the surface is cleaned of contaminants. Light sanding of the area before applying the spray also aids in generating a good bond between paint or resin and the substrate.
2. Incorrect setting of Spray Gun
Wrong adjustment setting leads to bad finish and material waste. For proper adjustment, take into consideration of coating material, kind of surface, and type of finish required. Wrong pressure adjustment leads to over-spray, runs, or splattering, which eventually leads to a waste of time and materials. Always spray the pattern on the scrap surface before spraying it onto the workpiece.
3. Non-Use Of Resin Fluid Heater On Certain Material
The greatest mistake when using a thick coat like resin would be not to use a resin fluid heater, The material warms up with a resin fluid heater to make it more fluid so that it sprays out smoothly. It is very helpful when you work in cooler environments or use thick coats that clog the spray gun easily. Preheating your material with a resin fluid heater makes sure you have a smoother application and fewer uneven layers.
4. Wrong Angle Or Distance From The Surface Using A Spray Gun
The closer the spray gun is to the surface, the greater the chances of having a runny coat. Over-distance from the surface is also likely to make an application uneven and thin with possible over-spray. Use a distance of 6 to 12 inches between the gun and the surface while moving it constantly at right angles to get a smooth coat.
5. Not Being Cleaned And Serviced Regularly
Each time a spray gun is used it needs to be cleaned out entirely so nothing blocks it up, so performance remains the same. Material left in the gun will harden overnight and contaminate other applications you may do tomorrow. Break the part down, and clean the piece out each time especially if you were working with some of the thicker coatings where you would use a resin fluid heater.
Meet Your Trusted Source for High-Quality Spray Guns
Phoenix Equipment is a top provider of high-class industrial equipment, which includes spray guns that offer reliability for certain applications. With a reputation for quality and durability, their spray guns ensure precision in every project. From auto to manufacturing, Phoenix Equipment provides professionals with the tools they need to deliver excellent results.