The Netgear EAX20 setup is designed to provide faster WiFi and cover a wider area, making it the wireless internet of the future. Even in the most remote part of your home, you will have access to internet speeds of up to 1.8Gbps once you have completed the Netgear EAX20 setup. This article will assist you if you are unfamiliar with how to install this fantastic range extender.

Instruction guide for Netgear EAX20 Setup 

• Install the WiFi extender.
• Place the extender and apply power.
• Connect to an existing WiFi network. Connect with the Nighthawk app. …
• Use the extender in access point mode.
• Connect a device to the extender network. …
• Log in to the extender after installation.
• Run the Smart Setup installation.

Netgear EAX20 Setup | Nighthawk App

• After connecting your WiFi devices (EAX20 extender and router)
• unlock your mobile phone.
• Right after that, make your way to the app store .
• Search for the Netgear Nighthawk app and download the same from the displayed results.
• Launch the app as soon as it gets installed on your mobile phone.
• Creating a Netgear account is the next thing you need to do.
• You can do so using your email ID and password.7. 
• Thereafter, use the default credentials of your Netgear EAX20 extender to log in to it.
• You will now be able to see on-screen instructions.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is mywifiext

Common issue for Netgear EAX20 Setup 

• Netgear extenders are the ultimate solution to get fast WiFi access in every nook.
• cranny of your home or workplace. 
• They receive wireless signals incoming from your existing router.
• amplify them to provide whole-home coverage.
• However, like any other electronic device, Netgear WiFi range extenders are also prone to technical issues.
• And these issues, if experienced, may ruin your internet experience.
• With this in mind, we have come up with this post.
• shedding some light on 5 common Netgear extender issues .
• along with their relevant solutions. Let’s get started.

Troubleshooting tips for Netgear EAX20 Setup 

1. Place your WiFi extender in the same room as that of the main router.
2. Log in to your router’s web user interface. 
3. If you come across any type of issue while logging into your WiFi router, contact our knowledgeable experts.
4. After login, click on the Wireless Settings section.
5. Now, look for the Channel option.
6. Change the router’s channel between 149-161 or 36-48.
7. Finally, click on the Apply button.
8. Open an internet browser on your computer.
9. Log in to your Netgear range extender.
10. The basic home screen will appear.
11. Go to the Wireless Settings section.
12. Enter your new Network Name (SSID).
13. Enter your new Password in the Passphrase field.
14. Click on the Save button to make the changes effective.

Tips for Netgear EAX20 Extender Setup Success

• Your range extender must be getting a fluctuation-free power supply throughout the setup process.
• There should not be any cuts on the Ethernet cable you are using to connect your WiFi devices.
• Your EAX20 WiFi device must be placed within the boundary line of the signals emitted by the main access point.
• If you choose to carry out the extender setup process via the Manual method,
• the web browser is supposed to be up-to-date.
• The username and password of your Netgear EAX20 setup must be entered very carefully. Else, you won’t be able to complete the installation process.

Netgear EAX20 Extender Setup | AX1800-Manual Guide

• Join the Netgear EAX20 to an Ethernet or Wi-Fi network by plugging it in.

• Use a web browser to go to the extender’s settings page and type mywifiext.net login or 192.168.1.250.

• Use the default login information, which is often admin for both the username and password.

• To configure Wi-Fi settings, choose your current network and input its password by following the setup procedure.

• If required, modify the extender’s settings and save them.

• Reconnect the devices to the increased Wi-Fi network after the extender has rebooted.
• To guarantee correct configuration, test the connection.

Netgear EAX20 WiFi Range Extender Setup | AX1800-WPS Guide

• After plugging in the Netgear EAX20 and pressing the WPS button on it, push the WPS button on your router and wait two minutes.

• Hold off until the extender’s WPS LED pure white, indicating a successful connection, turns on.

• Do it again if the connection drops.

• For best coverage, move the extender to the center of the room.

• Connect your devices to the Wi-Fi network that is extended.

• Use mywifiext.net setup or 192.168.1.250 to access the extender settings and make any extra configuration changes that may be required.

• Place your wireless extender near the main access point (router).

• Power up both devices.

• Are the LED lights on your EAX20 solid? Yes.

• You are required to press the WPS button on the host access point too.

• The range extender setup process completes

How To Login Netgear EAX20 AX1800 Extender ?

• Use Ethernet or Wi-Fi to connect to the EAX20 network.

• Go to mywifiext net setup or 192.168.1.250 in your web browser.

• Use the default login information, which is often admin for both the username and password.

• Open the Netgear EAX20 configuration panel.

• Adjust the extender’s settings as necessary.
• Save every change, then close the interface.

Netgear EAX20 WiFi Range Extender Firmware Update

• Use Ethernet or Wi-Fi to connect to the EAX20 network.

• Use the web addresses www.mywifiext.net setup or 192.168.1.250 to access the extender settings in a browser.

• Use the default login information, which is often admin for both the username and password.

• Select Settings or Maintenance from the menu.

• Click Check for Updates after selecting Firmware Update.
• To make modifications take effect, restart the extender after following the instructions to update the firmware.

How To Reset Netgear EAX20 AX1800 ?

• Find the EAX20’s reset button, which is usually located on the side or bottom.

• Hold down the reset button with a paperclip or other such instrument for approximately ten seconds.

• After the power LED blinks, release the reset button.

• A reboot of the EAX20 will indicate that the reset is finished.

• After the reset procedure, adjust the extender’s settings as necessary.