Wavlink AC1200 Setup can be your bestfriend when it comes to smooth and fast internet experience. We all know about the vast uses of the internet. From work, online shopping, gaming, to watching online videos we need access to the internet. Households or offices that are still relying on the routers for fast speed and wider coverage often face various connectivity issues. One of the common problems is definitely dead zones. So to get rid of all these issues it’s time to invest in a good quality and reliable wifi range extender. There is no denying the fact that Wavlink offers the best networking devices. One such range extender is Wavlink AC1200. So in today’s guide we’ll be sharing the complete Wavlink AC1200 Setup details.
Pre-Requirements For The Wavlink AC1200 Setup
For a successful setup you need following components:
- Your AC1200 range extender
- An Ethernet Cable
- Power Adapter
- A smart device
- Login credentials
- Default IP or web address
- The default SSID and password of Wavlink Extender’s wifi network.
- A vacant power source.
With every Wavlink AC1200 range extender model you get a detailed user guide. All the minute details like login credentials, web address, technical specifications etc is clearly mentioned in the user manual. So it is always advised to keep the manual by your side during the Wavlink AC1200 Setup.
Setup Through Web UI
There are different methods through which you can easily set up the extender. But one of the most reliable and traditional methods is using the internet browser. Do not worry as we are going to share the other two methods of Wavlink AC1200 Setup as well. First, let’s see the instructions for the web based setup:
✓ First, ensure that your router is powered on and functioning correctly.
✓ Now, plug in the AC1200 range extender into an electrical outlet and power it on using the provided power adapter.
✓ Let the extender boot up properly. Check the power LED status before proceeding to the next step.
✓ Further, pick up any smart device and connect it to the extender’s default wifi network.
✓ There are two different methods for the above step. One is wireless and the other is wired. To connect wirelessly, open wifi settings and connect to the network name “Wavlink-N” or Wavlink-AC. For wired connection use the Ethernet cable.
✓ Now on the host device launch a internet browser. Avoid using a corrupted or incompatible browser with Wavlink devices.
✓ In the internet browser’s address bar enter http://192.168.10.1 and press Enter key.
✓ Finally use the default credentials to login into the extender.
✓ Lastly, follow the steps that appear on the screen. Eventually the Wavlink AC1200 setup is all done.
Easy And Quick Setup Via WPS
As we said there are two other methods as well for the Wavlink AC1200 Setup. For the WPS method there is one essential requirement which is that your router should also have the WPS button. If it has then you are sorted because now to complete the setup you just need to push WPS button on both the devices. Here are the complete instructions for you to get started:
✓ Firstly power on the Wavlink AC1200 setup. Also make sure the router is working efficiently.
✓ Now locate the WPS button on the home router. Press and hold it until the WPS LED starts to flash. The flashing light means the router is trying to find the device and maka a connection.
✓ Further, press and hold the WPS button on your Wavlink AC1200. Hold the WPS button until you see a blue blinking LED light.
✓ Lastly, wait for a few seconds or a minute to let the devices sync together.
✓ Once you have successfully completed the setup of the Wavlink AC1200, the WPS LED will glow a solid blue.
✓ Now you can relocate the extender to an area where you need to get rid of dead zones or where there are connectivity issues.
Wavlink AC1200 Setup Via Wavlink App
The Wavlink app is not used just for setting up the extender. But you can also use it to monitor and manage your network effectively and that too anytime and anywhere from the convenience of your smartphone. So here are the detailed instructions for Wavlink AC1200 Setup using the app:
✓ After powering on the extender, connect your smartphone to the extender’s default wifi network.
✓ The user manual clearly mentions the default SSID and password, as well as the bottom of the extender.
✓ Once connected, download the latest version of the Wavlink app. One can easily install it from Google Play Store or an App Store.
✓ Now, open the app. Are you using the app for the first time? If yes then you need to create your Wavlink account if not then simply use the login credentials.
✓ Finally, follow the app instructions to set up the extender properly. On the same page you can customize various settings. You can change the default login details, you can customize the network name, update the system and can do much more.
